Smudges and Streaks on your Windshield

by Ronel Forbes

December 9, 2021

The windscreen gives you an excellent view of the surroundings. It’s a window through which you can see where you’re heading. As a result, knowing how to remove smudges and streaks from the windshield is critical.

Mud, dried dust, bird droppings, stray leaves, bug spray, and other contaminants can all cause windscreens to get dirty. We’ll go through how to keep your windshield and wipers clean in this article. Take a look at this:

It is critical not only to keep your car’s windshield clean but also to consider performing some things that will benefit it. Before you start cleaning your car’s windscreen, there are a few things to think about:

Choose the Right Glass Cleaner

Ammonia is found in several glass cleaners. This chemical has the potential to harm the glass’s protective coating. Choose a glass cleaner that does not include ammonia. Choose one that doesn’t leave any residue on the surface as well.

Choose the Most Appropriate Cleaning Location

It’s not a good idea to park your automobile near a water supply and clean it in the sunshine. It may not be advantageous to the glass because the cleaning liquid will evaporate more quickly. Choose a location where you can clean the automobile in the shade.

Choose the Correct Cloth

When cleaning your car’s windshield, consider using a high-quality cloth. If you’re going to use a microfiber cloth, make sure it’s at least 300 GSM so it can handle a lot of water and has a smooth texture.

Smudges and Streaks on Your Car’s Windshield Can Be Removed Easily:

The windscreen is one of the most crucial components of your vehicle since it allows you to see clearly while driving. If you want to focus better on the road, it should be kept clean at all times.

The following is a list of items to wipe the windshield with:

Cleaner for windshields
2 towels made of microfiber
a bath in warm water
Bar made of clay
Waxing your car on a regular basis (optional)

Here is a step-by-step tutorial to cleaning your car’s windshield

1st step

A glass cleaner can be sprayed on a car’s windshield. As previously stated, any remedy containing dangerous compounds should be avoided.

This causes discoloration or a yellow tint to the glass over time. Remember to just spray half of the glass with your chosen cleaning solution.

If you spray the entire surface, it may evaporate before you get halfway through the glass. This may leave a cleaning residue on the windscreen that isn’t essential.

2nd Step

Wipe the cleaner off the glass using a mixture of circular and straight strokes. This will aid in the removal of any stubborn stains or dried items such as bird droppings, mud, or food.

3rd step

Wrap the cloth over your finger and run it over the glass’s edges. Between the glass and the rubber tubing, dirt and debris can build.

People frequently clean the bigger portion of the glass while overlooking the sides. Cleaning them will aid in the removal of dirt that may subsequently run over the windshield if it rains or during a car wash.

4th step

Using a piece of clay bar, carefully rub half of the windscreen with warm water. This procedure will remove any minute particles that were not removed by the windshield cleaner.

With the clay bar, deep clean the glass in random circular and straight motions. If the clay bar becomes stuck or firm, go over the same spot until it glides smoothly.

Steps 1 and 2 should be repeated.

5th step

Wipe the glass dry with a dry microfiber cloth.

6th step (optional)

Apply a small layer of auto wax to the glass with a microfiber cloth, as you would on the rest of the car. After a few minutes, start polishing. This procedure will clear your windscreen and repel precipitation.

Also, read: Tips to Keep in Mind When Driving on Flooded Roads

Cleaning And Replacing Wiper Blades:

After cleaning the windshield, the wiper blades are the next most critical thing to keep it clean for longer. If the wiper blades are dirty, your efforts will be in vain. They might leave a lot of streaks on the windscreen after you have spent 30 minutes washing it.

Cleaning Wiper Blades: To clean the wiper blades, you’ll need a decent grade cleaner, such as WD-40, and a textured cloth, such as an old sock. Keep your car’s wipers open and away from the window in a vertical position. To eliminate the collected dirt and dust, soak the cloth with a cleaning solution and wipe it over the wiper’s rubber.

Carry on in this manner until the cloth is clean.

If you see cracks, bumps in the rubber, or hear a screaming sound while the wipers are in action, you should totally replace the wiper blade. Standard, flat, and hybrid wiper blades are the three most common varieties.

You should buy the best wiper blades for your car based on the sort of wiper blades it has. Furthermore, some vehicles feature blades that are of different sizes on the driver and passenger sides. When purchasing replacement wiper blades, keep these points in mind.

The blades are linked to the wiper arm primarily through two types of attachments. The hook type and the pin type are the two options.

To remove the blades from a hook type wiper, open the arm and look for the connection point. To move the blade, hold the lock tab and rotate it.

To disengage the blade from the arm hook, push it down firmly. To replace a blade, just insert the blade’s pin into the hook until you hear a click, then straighten the blade.

Locate the lock tab and pull it with your finger to remove the pin type wiper blade. A gesture similar to taking the batteries out of a television remote. Next, carefully push the wiper blade sideways while holding the pin.

Position and secure the blade in the pin by slightly lifting the tab to insert a new one. Then, until you hear a click, lock the tab.